(1).png){kind=small}
.png){kind=small}
.png){kind=small}
Sundress on the Janome M7
Another new make on the Janome M7 using various stitches and features to make a great dress perfect! I found a link to a free blouse pattern on the Australian Peppermint Magazine on Spoonflower. Following the trail of cookie crumbs (or thread bits), I then found the Wide-Strap Maxi dress pattern, which is a free PDF download. They ask if you’d like to make a donation to support the cost of the site, so I did, and I GOT A THANK YOU! Nice! Click on the pattern name or here for the hotlink. Along the way I took pictures and the edited them into this under-3-minutes video:
There’s no audio for the first two minutes, but there are captions. At the end for the video of me out in the yard, you may want to turn up the sound…I increased the volume on the film clip, but it is still sorta quiet when I am turned around.
Here are some of the pictures from in the video!
The cotton lawn fabric is from Leslie Tucker Jenison’s Wildwood line for Robert Kaufman. I purchased mine on Etsy in late spring 2021. The dress has a facing on the front and wide straps (hence the name Wide-Strap Maxi Dress). I shortened the dress by 8 inches to a midi length. The only other change was to add interfacing to the facing since the cotton Lawn is so soft. If made in linen or a heavier weight cotton or tercel, would likely not need the interfacing.
From the back: there is a casing at the top, with wide elastic inside. You set the length so that it holds the dress snug against your back (NO wardrobe malfunctions!) but not tight (no “muffin top”!). The pattern suggest testing the placement of the straps. I agree. The gathers had a tendency to move, with the dress going flat in the center and the straps moving towards my underarms. Which led to the straps falling off my shoulders. So with the dress OFF, I move the straps toward the center and safety pinned them in place. This concentrates most of the gathers in the center, which makes it flattering from the front and solves the straps-falling-off issue. I will stitch a vertical line on the casing/elastic so I can remove the pins, but using pins first to get the straps where YOU want them is a good idea. I also now understand why some sundress patterns have the straps go really narrow and “V” in the center. This way, though, they easily cover bra straps.
Since I live in Maine and my 20s and 30s were long ago, I find that I feel rather bare, but I am getting used to the open back. I had thought even before making it that I would shorten the straps to be less bare, but discovered that would put the darts well above my bust and make the front fit poorly. If/when I make this again, I will cut extra at the top sides, shorten the straps, and then figure out a better-for-my-body placement of the darts.
Like many of the indie patterns now, the instructions are like a class in a bag–they certainly aren’t like the bare-bones info in the Butterick and Vogue patterns from the 70s, 80s and 90s that I grew up using. There are delightful instructions for using French seams which totally enclose the raw edges. Hint: be sure to trim the edges of any fraying threads before you sew the second part of the seam so that no “whiskers” pop out.
Align right edge of foot with first sewn seam on a French Seam. Move the needle so that it encloses the first, narrow seam. 
Using the overcast foot to get a clean finish on a raw edge.
Having a selection of presser feet makes it SO MUCH EASIER to do beautiful work! I like my clothes as pretty on the inside as on the outside!
Thanks as always to Janome America for having me as a Janome Artisan since 2003!!!!!!!
August 18th, 2021 at 7:30 pm
You are adorable. The dress is fab! And yes, presser feet make all the difference. Class act!
August 19th, 2021 at 1:42 pm
Thanks so much Jenny…. it is such a delight to create something tangible!!!!! Can you tell I’m swamped with Town work??????