Here is some flotsam and jetsam from the workshop. First, a photo of the loading dock which oh-so-conveniently backs onto the classroom area and has some clothesline trying areas:

One of the most valuable exercises for me during the entire five days was doing gradation tests on the same 5 percent dye concentrate when used in full immersion dye bath (well, as close as you can get with a 3×8 inch sample in a 16 ounce plastic cup), low-water immersion (ditto), and print paste mix. Here’s a photo of some of Carol’s samples:

And this photo is of the gradation sets Nancy and I did–the pale gray to nearly black runs on the left:

The bottom line is that print paste tends to come out about one step lighter than comparable pieces dyed in full and low-water immersion processes. What this means is that if one wants to dye-paint (like I want to do, and like Hollis Chatelain does with incredible skill and artistry), you can actually get predictable and repeatable results. Since fabric appears darker when wet, and since all dark dyes look black when wet, it is as if you were (literally) painting in a cave with no lights. By understanding and being able to predict your when-dry color, you can actually paint with the dye and get good results. Now, to finish writing my book so I can go TRY this for real!

On the first day of the workshop, Carol invited us to pick a color which would be our “base” color to play with. Since I knew I needed to make some fabric for an art quilt destined to an invitational exhibit, I knew I wanted blues and greens, so I selected a somewhat teal blue. Here are some of our pieces batching on a work table. Please don’t ask me WHY I had never thought of something as simple as this: just lay your pieces flat, layer with a plastic drop sheet, add more pieces on top, another piece of plastic, etc.

This piece is one where I tried a variety of techniques on a half-yard length:

Then we started playing with resists: Elmer’s washable blue-gel school glue, cold wax resist, and Presist.

The gel-glue has the virtue of being inexpensive and available just about everywhere. Since I wanted fabric for a pond and stream, I figured I’d make watery-shaped marks and blobs. The drawback to the gel-glue is that it takes a LONG time to dry: even though it was moderately warm (low 70s, which for Massachusetts in October is warm) and not oppresively humid, it took well over a day to dry fully. First I painted over the glue gel with a thickened print paste mix plus dye plus dye activator, and batched it. Then, I wanted to add more color and texture, so I scrunched the whole thing up in a plastic container and dumped on more dye. This partially dissolved the gel-glue which then migrated and formed the “rice” pattern on the cloth…cool!

Presist is a VERY thick gooey stuff that looks like molasses, except thicker. You pour (slowly) some of the gunk onto a plate or other flat, plasticky surface. You either dip your stamp into the Presist or use a small make-up sponge to daub the presist onto your chunky stamp. I did that in the wave area of the 1/2 yard length shown above. This photo (for some reason the color in the photo is hideous–color accuracy on the photo above is better) shows what it looked like after a couple of overdyes and some drips and drops from the cold wax (next item):

I love love LOVE the cold wax! The stuff is a milky white, in both color and consistency, and not inexpensive! You don’t have a lot of control with it but you can get these sweeping brush strokes for subtle overdyes. Here is a close-up of the upper section of the half-yard piece which shows some of the brushmarks and “water drops”. The color doesn’t photograph well (at least not with the time I spent setting up the shot!), plus it is very subtle to begin with. I would love to play with this medium more and see what I can do… I can see some awesome feathery-grass-like pieces in it. As with all wax (hot or cold!) you have to remove it; in this case, you can do the usual iron between newsprint or keep a plastic bucket (an old kitty litter bucket is perfect) for rinsing the wax out. The wax sticks to the side of the bucket instead of going down and coating your pvc water pipes in your house. That is a good thing!

Here is the print batching table once again, with three of my in progress pieces. As usual for wet cotton, the colors are deeper when wet.

The piece in the middle in the photo above is shown in detail below: although it is pretty unremarkable as a piece of manipulated cloth, it will be very useful: think forest pond!

I made a second “monoprint” from the same leftover blobbies plus some more greenish print paste mixto make this more textured piece; think algae on forest pond!

The piece on the bottom is one of my favorites. The blobbies are from using thickened print paste mix plus dye on vinyl, letting it separate into globs, taking a monoprint, then batching. After the piece was batched (to permit the chemical reaction between dye and cloth to happen), I allowed the piece to dry, then painted it with a thin wash of activated dye liquid, and here is the result:

Next assignment: make some art quilts out of the art cloth!

As I mentioned last month in my post about the book Creative Quilting: the Journal Quilt Project, this is the final year for this fantastic journey. Instead of making nine paper-sized quiltlets each month, this year’s assignment was to use three (or more) techniques used in journals in the book to create our 17×22 inch (vertical orientation) journal quilt. Here is my journal quilt for this year:

For several years, I have had lurking in my brain a quilt about peace, and the horrors of war, and its innocent victims. The need to create that quilt stems from a visit to Hiroshima in 1996 when my mom invited me to accompany her on a trip to Japan. She had served in Japan in 1946-47 with the US Occupying Forces, and fell in love with the country, its people and its culture. This quilt is a test-run for several techniques which I hope to use on the large Peace Quilt one of these years.

Mom has a photo album from her two years there, plus her travels to mainland China (before the Communist Revolution, which came two years later), Thailand and Cambodia. One photo in particular, above, was riveting: a somewhat melancholy girl sat on a make-shift swing someone had fashioned from the rubble of a bombed-out building in Tokyo, 1946. Mom purchased the photo from a Western photographer, but doesn’t know any more about it. For my first technique, I took a digital photo, manipulated it to improve sharpness and give a faded “old photo” look, and printed it on fabric. If ANYONE has any idea who took this photo, please tell me!

That photo alone, though, wasn’t enough to carry the quilt, so I decided to include some of my photos of the ruins of the Hiroshima dome, the cenotaph to mark the deaths of all the victims of the atomic bombs and the Children’s Peace memorial.

That memorial features an origami crane in the sculpture because cranes represent good luck and long life. That led to the second of my techniques: a thermofax screen.

A what you ask? Do many of you remember dittos from school, before we had photocopying machines? We the ditto masters were made with these machines that can also be used with a special plastic-coated mesh fabric and a carbon photocopy (or pencil drawing) to create a stencil. I ended up having to order away for the stencils (fabulous service from Pam Relitz of Flying Images, rockitz@tds.net), but can see that I need to save up to buy one of the antique thermofax machines so I can make my own screens! (If there is anyone out there in blogdom who has blogged the process with photos–Gerrie? Rayna? send me a link and I’ll add it here).

I made my origami cranes, photographed them, traced out the exact lines at the angle I wanted, and had several screens made, then used metallic and regular paints to screenprint onto the background batik fabric.

I was having trouble coming up with a coherent “whole”, however. In browsing the Creative Quilting book (while waiting for hubby who had just had rotator cuff surgery and was at post-op physical therapy), I spotted the ogival window shape in Larkin Van Horn’s piece and new I had my organizing element. I rooted through my sheer fabrics, intending to dye or paint something into which I would cut windows, when I came across a rejected but HUGE painted sheer piece (about 48×60 inches) that was the first attempt at one of the overlays for Tree Spirits 2: Song of the Solstice Grove (can be seen on my website here). As I tossed the piece over the batik the tree trunk landed on the left side of the quilt…PERFECT!

After sketching out the location of the windows on the quilt, getting a nice balance of large and small yet permitting the screenprinting underneath to be revealed, I made a paper pattern which I placed under an old storm window. I used a heat-tool (aka stencil cutter) to cut the windows in the sheer fabric. Since synthetic sheer fabric is notoriously wiggly, I lightly sprayed the sheer with basting spray to adhere it to the storm window before cutting; because the fabric was light, I could see the paper pattern underneath and cut the windows exactly in the correct places (a metal ruler helped on the straight edges!). I then placed the sheer over the background, couched (stitched) gold yarn around the windows, and quilted the entire piece.

The serendipitous placement of the treetrunk on the left led to the overall quilting design, with bark, grasses and leaves and branches. In the background of the overlay I used a basketweave pattern, while I used a swirly cloud motif inside the windows. Finally, I couched two twisted lengths of the gold “yarn” (more like a fine cord) to what would become the edges, added facings which were turned to the back, and stitched down the facings.

I hope you like it…and thanks to all who managed to read all the way to the end!

Joshua breezed through surgery, though was quite upset that he had to stay overnight in the hospital–a routine thing to make sure he comes out of the operating-room-pain-meds OK and is able to tolerate the pain with oral pain meds. As usual, surgery began late, but then the procedure to remove the screws used to hold the rod in his thighbone were removed (along with some bone growth where there shouldn’t have been any) since the screws were bothering him (you can feel them from the outside of his hip!) and he is well-healed on that bone.

Then they removed the external fixator, the metal stuff on the outside of his shin and replaced it with an ace bandage and a boot cast which he will wear for two weeks. At long last, next weekend he and I will go school clothes shopping! The doc said he can take the boot cast off while in the dressing room, just to wear it while walking. They did a strength and flex test on the shinbones while he was in surgery, and all is fine. He’ll be home sometime early Saturday afternoon we hope….at which point I’ll be teaching machine quilting in Rockland at Quilt Divas.

Thanks to all for your good wishes…clearly they made it to the OR in Bangor and whizzed things right along!

Tomorrow is Friday, November 2nd, and if all goes well, will be the sixth and hopefully FINAL surgery for Joshua (at least for this year…maybe one more in a year or so). Yes,  the rods and pins and hardware screwed into his shinbone are to come out! So if you chance to see this post on or before Friday, send good thoughts toward Eastern Maine Medical Center in Bangor, where he will be in surgery to remove the pins, a screw from the rod in his femur (thigh bone), and some bone growth that shouldn’t be there near the screw. Hopefully the last two items will help alleviate the pain when he rolls over on that bone-y, lanky hip! (I don’t think I EVER had that problem…..sigh….)

I’ll post an update at some point over the weekend.